There are two methods of fitting the front Haul Loop. Both use 2 x H-Duty cable ties:

Undo the web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp. Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic. The figure eight method is a superior one, as you can fine-tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.